Search Catalog
      GO   
 All Categories    FLEX-5S
Pull to Stroke Installation Tool
All Categories > Fastener Installation Systems > Hydro-Pneumatic Tools > FLEX-5 Series
Rivet Nut Installation Tool
4-40 to 3/8-24 (M3 to M10) > FLEX-5S
Pull to Stroke Installation Tool > Item # FLEX-5S 3724  

Item # FLEX-5S 3724, FLEX-5S
Pull to Stroke Installation Tool

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The SFS FLEX-5S features 7mm of available stroke and is capable
of installing rivet nuts from M3 to M10 and 6-32 to 3/8-24 and is based on an innovative modular design. The FLEX-5S comes as a pull to stroke tool but offers the flexibility of a pull to pressure installation with Sherex's conversion kit, allowing for the proper method to be used based on the application requirements. The
FLEX-5S tool has the ability to be upgraded from the original base tool to different levels of process monitoring that will provide feedback to the operator ensuring each rivet nut is set properly. The original base tool also will offer upgrades such as conversion to an in-line tool and conversion to a split tool with a remote booster.

The SFS FLEX-5S has an all aluminum body which gives it added strength and durability relative to plastic tools in the market. The tool features a single stage trigger and Socket Head Cap Screw Mandrel. The FLEX-5S is one of the lightest tools of its kind in the marketplace at only 4.2 pounds (1.9 kg) and comes in a convenient, easy to carry gray case.




 Specifications   Resources   

Installation Method
Pull to Stroke

Thread Size
3/8-24 UNF

Available Stroke
7 mm (0.276 in)

Weight
4.2 lbs.
(1.9 kg)

Air Pressure
90 psi

Air Use
5 cfm

Complete Head Set Assembly P/N
FL5-HS-3724

Anvil (1/2) P/N
FL5-HS-00842

Mandrel P/N
M-3724-250

Hex Driver P/N
FL5-HS-00742

Reducing Sleeve (5) P/N
No Reducing Sleeve Needed on 3/8 or M10