Sherex Fastening Solutions, LLC
Sherex Fastening Solutions, LLC.
400 Riverwalk Pkwy, Suite 600
Tonawanda, NY 14150
Toll Free: 866.474.3739
Tel: 716.875.0315
Fax: 716.875.0358
Email: info@sherex.com
Print Back
Features & Benefits
  • Heavy-duty, self-locking design
  • For use with bolts up to Class 10.9, Grade 8
  • Available in sizes from 1/4" (M6) to 1-1/2" (38 MM) Other sizes available by special order.
  • Available in 1010 Carbon Steel
  • Carbon Steel washers are case hardened and coated with RoHS-compliant Delta Protekt®
  • Provided in pre-assembled, glued pairs
  • Easy to install with standard tools
  • No re-tightening needed once installed
  • Vibration proof according to MIL-STD-1312-7
Proven Results
Disc-Lock® Locking Washer Junker Test

Disc-Lock® Wedge Locking Washers have been tested on a Junker Vibration Machine. The Junker test considered the most severe vibration test for bolted joints according to DIN 65151, is used to determine the point at which a bolted joint loses its preload when subjected to shear loading due to transverse vibration.

When tested against a standard washer using the Junker test, Disc-Lock® Wedge Locking Washers remained secure under severe vibration conditions, while the standard washer loosened significantly.

Proven Applications
Disc-Lock® Wedge Locking Washers outperform conventional, split-ring, and other style washers in a wide variety of high stress, corrosive, and vibration-sensitive applications including:
  • Agriculture Equipment
  • Automotive
  • Construction Equipment
  • Heavy Rail
  • Logging Equipment
  • Marine
  • Military
  • Mining
  • Oil Drilling Equipment
  • Solar
  • Wind
  • Waste Management
Installation
  • To install the Disc-Lock® Washer, place the preassembled pair of washers between the nut and the joint material.
  • As the nut is tightened, one half of the Disc-Lock® Washer is seated to the joint material and the other to the nut.
  • Disc-Lock® Washers should only be used against flat, relatively smooth metal surfaces.
  • If the joint material is not metal, the Disc-Lock® washer may be used by securing the metal plate to the joint material in such a manner that the metal plate will not rotate.
  • A torque wrench is not required to install Disc-Lock® Washers.
  • An air-gun can be used when installing and removing Disc-Lock® Washers.
  • If installed correctly, the Disc-Lock® Washer will ensure that the fastener remains secure, and will not require any re-tightening.
Torque Guidelines
When installing Disc-Lock® Washers in a common application, expect an increase in required torque over recommended installation torque to achieve proper clamp load and maximum joint safety. Due to varying installation conditions and customer-specific applications, additional information and torque recommendations are available by contacting Engineering support at Disc-Lock®.

Note
Weight and thickness of pairs will vary slightly with gauge of metal.
  • Coated in Delta Protekt® KL100 and VH302 GZ.
  • Disc-Lock® Wedge Locking Washers are also available through our Made in the U.S.A. product line
Unit of Measure

Specifications

Dimensions

 N/A


Brands

 N/A Disc-Lock™

Size

 N/A 7/8 in22 mm

Inner Diameter (A)

 N/A 0.883 in22.44 mm

Outer Diameter (C)

 N/A 1.470 in37.34 mm

Thickness (EE)

 N/A 0.268 in6.8 mm

Box Quantity

 N/A 500

Material

 N/A 1010 Carbon Steel

Industry Standards/Compliance

 N/A ISO 9001:2008 ISO TS16949 MIL-STD-1312-7 RoHS

Package Type

 N/A Box

Resources

N/A Disc Lock Washer Catalog