Sherex Fastening Solutions, LLC
Sherex Fastening Solutions, LLC.
400 Riverwalk Pkwy, Suite 600
Tonawanda, NY 14150
Toll Free: 866.474.3739
Tel: 716.875.0315
Fax: 716.875.0358
Email: info@sherex.com
Print Back
The ACN clinch nut is designed to be installed into pre-pierced holes. Displacement lobes on the clinch nut force the sheet metal to flow into the locking groove, allowing the top of the sheet metal to remain flat with no indentation and providing the nut with high push out and torque values.

The ACN clinch nut is designed for thicker sheet metal applications from 2mm to 10mm thick, and is compatible with Class 8, 9, & 10 hardware depending on application requirements.

Contact Sherex for inch thread requirements.
ACN Image
Unit of Measure
1 

Item #

Thread Size

A**
(mm)

B
(mm)

D1
(mm)

D2
(mm)

Sheet Thickness
(mm)

Hole Size Ø
+0.1/-0.0 (mm)

ACN2-580-1.9 N/A M5 N/A 6.6** (For 2mm sheet metal) N/A 4.7 N/A 14.0 N/A 8.6 N/A 2.0-10.0 N/A 8.75
ACN2-610-1.5 N/A M6 N/A 6.6** (For 2mm sheet metal) N/A 4.7 N/A 14.0 N/A 8.6 N/A 2.0-10.0 N/A 8.75
ACN2-8125-1.9 N/A M8 N/A 7.8** (For 2mm sheet metal) N/A 5.9 N/A 16.6 N/A 10.6 N/A 2.0-10.0 N/A 10.75
ACN2-1015-2.3 N/A M10 N/A 9.1 (For 2mm sheet metal) N/A 7.2 N/A 18.4 N/A 13.1 N/A 2.0-10.0 N/A 13.25
ACN2-12175-2.3 N/A M12 N/A 11.5** (For 2mm sheet metal) N/A 9.6 N/A 23.9 N/A 15.6 N/A 2.0-10.0 N/A 15.75
ACN2-8125-2.3 N/A M8 N/A 7.8** (For 2mm sheet metal) N/A 5.9 N/A 16.6 N/A 10.6 N/A 2.0-10.0 N/A 10.75
Unit of Measure
1