Search Catalog
      GO   
 All Categories    MS 100
Rivet Nut Installation Tool
5/16-18-1/2-13 (M8-M14)
All Categories > Fastener Installation Systems > Hydro-Pneumatic Tools > MS 100
Rivet Nut Installation Tool
5/16-18-1/2-13 (M8-M14) > View Items  

MS 100
Rivet Nut Installation Tool
5/16-18-1/2-13 (M8-M14)

 
Check up to five results to perform an action.

The MS 100 Rivet Nut Installation Tool is designed for installing thin wall & heavy duty rivet nuts from 5/16-18 to 1/2-20 (M8-M14).

This all-purpose Spin-Pull tool is adjustable to install rivet nuts in materials of different thickness and has a one-touch trigger with auto reverse for easy installation. It comes with one Mandrel and Anvil.

Note

The MS 100 installation tools should be operated at 80-100 psi. Sherex recommends the use of an air regulator, air filter and lubrication system to reduce the wear of internal components. It is also recommended to lubricate the mandrel to increase performance. Mandrels should be replaced when excessive thread wear occurs.

Spin-Pull Rivet Nut Installation

Spin-Pull tools, while able to install any style of rivet nut, are used primarily for the installation of heavy-duty rivet nuts due to their higher installation force. A Spin-Pull tool operates by spinning the rivet nut onto the tool and then pulling back on the threads to install the rivet nut. The tool can be adjusted for different grip lengths and to achieve proper setting.

To begin, ensure that the mandrel extends at least one thread beyond the end of the rivet nut. Next, hand thread the rivet nut one turn onto the mandrel to prevent thread crossing. Depress the trigger halfway to thread the rivet nut onto the mandrel.

With the rivet nut flush against the head of the tool, place the rivet nut into the properly sized hole in the parent material and fully depress the trigger of the tool.

When the rivet nut is installed, the body of the rivet nut will expand in the hole and then form the bubble on the backside of the parent material. Once the rivet nut is installed, release the trigger activating the tool's automatic reversing feature.

To the right is a properly installed heavy-duty rivet nut. The increased wall thickness and flange thickness make the CA series ideal for applications where a high strength fastening joint is necessary.




    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 12 of 12 1 

Item #

Thread Size

Air Pressure

Mandrel P/N

Anvil P/N
MS 100 5/16-18 5/16-18 80-110 psi (5.5-6.9 bars) MA-373-3118 MA-369-3118
MS 100 5/16-24 5/16-24 80-110 psi (5.5-6.9 bars) MA-377-3124 MA-369-3118
MS 100 3/8-16 3/8-16 80-110 psi (5.5-6.9 bars) MA-374-3716 MA-370-3716
MS 100 3/8-24 3/8-24 80-110 psi (5.5-6.9 bars) MA-378-3724 MA-370-3716
MS 100 7/16-14 7/16-14 80-110 psi (5.5-6.9 bars) MA-375-4314 MA-371-4314
MS 100 7/16-20 7/16-20 80-110 psi (5.5-6.9 bars) MA-301-4320 MA-371-4314
MS 100 1/2-13 1/2-13 80-110 psi (5.5-6.9 bars) MA-376-5013 MA-372-5013
MS 100 1/2-20 1/2-20 80-100 psi (5.5-6.9 bars) MA-379-5020 MA-372-5013
MS 100 M8 M8 80-100 psi (5.5-6.9 bars) MA-308-08MM MA-318-08MM
MS 100 M10 M10 80-100 psi (5.5-6.9 bars) MA-310-10MM MA-320-10MM
MS 100 M12 M12 80-100 psi (5.5-6.9 bars) MA-312-12MM MA-322-12MM
MS 100 M14 M14 80-100 psi (5.5-6.9 bars) MA-312-14MM MA-324-14MM
  Results 1 - 12 of 12 1