- All Categories
-
Fasteners for Thin Sheet Attachments
-
Blind Rivet Nuts
-
Round Body Rivet Nuts
-
Optisert Series
- Optisert -- Open End (Metric) | Steel (302 Items)
- Optisert -- Open End (Inches) | Steel (144 Items)
- Optisert -- Closed End Sealed (Metric) | Steel (302 Items)
- Optisert -- Closed End Sealed (Inches) | Steel (144 Items)
-
CAL Series
- CAL Series - Steel (Inches) | Large Flange Knurled Body Thin Wall Series (268 Items)
- CAL Series - Steel (Metric) (368 Items)
- CAL Series - Aluminum (Inches) (132 Items)
- CAL Series - Aluminum (Metric) (368 Items)
- CAL Series - Stainless Steel (Inches) (10 Items)
- CAL Series - Stainless Steel (Metric) (6 Items)
-
CAK Series
- CAK Series - Steel (Inches) | Small Flange Knurled Body Thin Wall Rivet Nut (2256 Items)
- CAK Series - Steel (Metric) (293 Items)
- CAK Series - Aluminum (Inches) (2256 Items)
- CAK Series - Aluminum (Metric) (293 Items)
- CAK Series - Stainless Steel (Metric) (10 Items)
-
CA Series
- CA Series - Steel (Inches) | Heavy Duty Rivet Nut Flat Head, Large Flange, Smooth Shank (193 Items)
- CA Series - Aluminum (Inches) (193 Items)
- CA Series - Stainless Steel (Inches) (193 Items)
-
CAO Series
- CAO Series - Steel (Inches) | Small Flange, Smooth Body, Thin Wall Rivet Nut (134 Items)
- CAO Series - Steel (Metric) (162 Items)
- CAO Series - Aluminum (Inch) (134 Items)
- CAO Series - Aluminum (Metric) (162 Items)
-
CFW/CAW Series
- CFW/CAW Series - Steel (Inches) | Cadmium Free Diamond Knurled Body 360° Swaging Rivet Nut (7 Items)
- CFW/CAW Series - Steel (Metric) (5 Items)
- CFW/CAW Series - Aluminum (Inches) (7 Items)
- CFW/CAW Series - Aluminum (Metric) (5 Items)
- CFW Series - Stainless Steel (Inches) (7 Items)
- CFW/CAW Series - Stainless Steel (Metric) (5 Items)
-
CFT/CAT Series
- CFT/CAT Series - Steel (Inches) | Cadmium Free Small Flange 360° Swaging Rivet Nut (9 Items)
- CFT/CAT Series - Steel (Metric) (7 Items)
- CFT/CAT Series - Aluminum (Inches) (9 Items)
- CFT/CAT Series - Aluminum (Metric) (7 Items)
- CFT Series - Stainless Steel (Inches) (9 Items)
- CFT Series - Stainless Steel (Metric) (7 Items)
-
CPB Series Rivet Nuts
- CPB Series - Steel (Inches) (162 Items)
- CPB Series - Steel (Metric) (325 Items)
-
CPN Series Rivet Nuts
- CPN Series - Steel (Inches) | Straight Shank Slotted Body Rivet Nut (162 Items)
- CPN Series - Steel (Metric) (325 Items)
-
UPO Tubtara®
- UPO Series - Steel (18 Items)
- UPO Series - Aluminum (15 Items)
- UPO Series - 304 Stainless Steel (11 Items)
- UPO Series - 316 Stainless Steel (3 Items)
-
UFO Tubtara®
- UFO Series - Steel (13 Items)
- UFO Series - Aluminum (11 Items)
- UFO Series - 304 Stainless Steel (6 Items)
-
UKO Tubtara®
- UKO Series - Steel (8 Items)
- UKO Series - Aluminum (4 Items)
- UKO Series - 304 Stainless Steel (5 Items)
- UKO Series - 316 Stainless Steel (3 Items)
- UKO Series (Inches) - 304 Stainless Steel (3 Items)
-
UPO RS Tubtara®
- UPO RS Series - Steel (10 Items)
-
UFO RS Tubtara®
- UFO RS Series - Steel (10 Items)
-
CLM
- CLM Series - Steel (5 Items)
- CLM Series - Aluminum (5 Items)
-
CKM
- CKM Series - Steel (5 Items)
- CKM Series - Aluminum (5 Items)
-
Optisert Series
-
Hex Body Rivet Nuts
-
FHL Series
- FHL Metric Series (271 Items)
- FHL Inch Series (1042 Items)
-
FHK Series
- FHK Metric Series (307 Items)
- FHK Inch Series (1181 Items)
- LRGH Series (4 Items)
-
CAH Series
- CAH Series - Steel (Inches) (2257 Items)
- CAH Series - Aluminum (Inches) (2256 Items)
- CAH Series - Steel (Metric) (293 Items)
- CAH Series - Aluminum (Metric) (293 Items)
-
HUKO Series
- HUKO Series (Inches) (3 Items)
- HUKO Series (Metric) (8 Items)
- HUPO Series (10 Items)
-
HUKO Stainless Series
- HUKO Series - 304 Stainless Steel (6 Items)
- HUKO Series - 316 Stainless Steel (3 Items)
-
HUPO Stainless Series
- HUPO Series - 304 Stainless Steel (4 Items)
- HUPO Series - 316 Stainless Steel (3 Items)
-
CFH Series
- CFH Series - Steel (Inches) (15 Items)
- CFH Series - Steel (Metric) (12 Items)
- CFHD Series (6 Items)
-
FHL Series
-
Large Size Rivet Nuts
- Round Body Large Size Rivet Nuts (5 Items)
- Full Hex Body Large Size Rivet Nuts (4 Items)
-
RIV-FLOAT® Rivet Nuts
- RIV-FLOAT® Rivet Nuts (251 Items)
- RIV-FLOAT®-Short Series (6 Items)
- Rivet Nut Studs
-
NAS/MS Rivet Nuts
- NAS 1329 Flat Head Style (46 Items)
- NAS 1330 Countersunk Head Style (46 Items)
- Specialty Fastener Solutions (13 Items)
-
Round Body Rivet Nuts
- Fasteners for Plastics & Composites
-
Clinch Nuts
- ACN Series High Strength Clinch Nut Series (6 Items)
- ARN Series Universal Riveting Nut Series (5 Items)
- ASN Series Serrated Style Clinching Nut Series (4 Items)
- Load Bearing Nut Plates and Stud Plates
- Compression Limiters
-
Blind Rivet Nuts
-
Vibrational Loosening Prevention - Wedge Locking Technology
- TEC Series® Wedge Locking Washers
-
Disc-Lock® Wedge Locking Washers
- Disc-Lock® Carbon Steel Washers (17 Items)
- Disc-Lock® Stainless Steel Washers (10 Items)
-
Disc-Lock® Wedge Locking Nuts
- Disc-Lock® Two-Piece Wedge Locking Nuts (18 Items)
- Disc-Lock® Safety Wheel Nut
- Disc-Lock™ Heavy Hex Nuts (6 Items)
- Disc-Lock® Bolts
-
Fastener Installation Systems
-
Rivet Nut Hand Tools
- Rivet Nut Hand Tool (16 Items)
- DLHT Double Lever Hand Tool (12 Items)
- DRHT Double Ratchet Hand Tool (15 Items)
- LHF 202 Hand Tool
-
Pneumatic Tools (Spin-Spin)
- SSG 800 Pistol Style Series (20 Items)
- SSG 900 Inline Style Series (17 Items)
- SSG 910 Inline Right Angle Style Series (17 Items)
-
Hydro-Pneumatic Tools
- MS 100 Rivet Nut Installation Tool 5/16-18-1/2-13 (M8-M14) (12 Items)
-
FLEX-5 Series Rivet Nut Installation Tool 4-40 to 3/8-24 (M3 to M10)
- FLEX-5S Pull to Stroke Installation Tool (17 Items)
- FLEX-5P Pull to Pressure Installation Tool (17 Items)
- FLEX-18 Rivet Nut Installation Tool 5/16-18 - 3/4-10 (M8-M20) (12 Items)
- Automation
-
Rivet Nut Hand Tools
-
Fasteners for Thin Sheet Attachments
Hydro-Pneumatic Tools
oling-hydro-pneumatic-spin-pull-installation-tools
Contact us for more information on the FLEX-5 and it can improve the assembly process in your facility. sherex tool1-2_nb.jpg
This all-purpose Spin-Pull tool is adjustable to install rivet nuts in materials of different thickness and has a one-touch trigger with auto reverse for easy installation. It comes with one Mandrel and Anvil.
Note
The MS 100 installation tools should be operated at 80-100 psi. Sherex recommends the use of an air regulator, air filter and lubrication system to reduce the wear of internal components. It is also recommended to lubricate the mandrel to increase performance. Mandrels should be replaced when excessive thread wear occurs.
Spin-Pull Rivet Nut Installation
Spin-Pull tools, while able to install any style of rivet nut, are used primarily for the installation of heavy-duty rivet nuts due to their higher installation force. A Spin-Pull tool operates by spinning the rivet nut onto the tool and then pulling back on the threads to install the rivet nut. The tool can be adjusted for different grip lengths and to achieve proper setting.
To begin, ensure that the mandrel extends at least one thread beyond the end of the rivet nut. Next, hand thread the rivet nut one turn onto the mandrel to prevent thread crossing. Depress the trigger halfway to thread the rivet nut onto the mandrel.
With the rivet nut flush against the head of the tool, place the rivet nut into the properly sized hole in the parent material and fully depress the trigger of the tool.
When the rivet nut is installed, the body of the rivet nut will expand in the hole and then form the bubble on the backside of the parent material. Once the rivet nut is installed, release the trigger activating the tool's automatic reversing feature.
To the right is a properly installed heavy-duty rivet nut. The increased wall thickness and flange thickness make the CA series ideal for applications where a high strength fastening joint is necessary. New-MS100.png
FLEX-5 Series Rivet Nut Installation Tool 4-40 to 3/8-24 (M3 to M10)
The Sherex FLEX-5 is one of the most popular rivet nut hand tools on the market. It's durable, reliable, has the ability to be hung on a balancer, and is used for both low and high volume installations. This spin-pull tool can install a wide variety of rivet nuts and grip ranges, fast and efficiently. It's an easy-to-use tool with a single stage trigger and only a 2-3 second cycle time. Both the pull to pressure and stroke Flex-5 also comes with Process Monitoring capabilities to ensure a perfect installation every time.Contact us for more information on the FLEX-5 and it can improve the assembly process in your facility. sherex tool1-2_nb.jpg
RIV943 Rivet Nut Installation Tool
The new RIV943 hydropneumatic rivet nut installation tool is a very durable and reliable tool that can install rivet nuts up to M12 and 1/2"-13. This new tool will replace the discontinued RIV942 and Sherex MS100, and bring enhanced capabilities and features over those two aforementioned tools.
RIV943 Features
- 32 kN Pulling Force: Delivers unmatched strength, making it ideal for installing larger size rivet nuts and rivet nut studs in industrial applications.
- Wide Range of Installations: The RIV943 and install rivet nuts and rivet nut studs sized from M4 to M12 and unified thread equivalents.
- 1-Phase Cycle: Simplifies the installation process for greater efficiency.
- Direct Force and Stroke Adjustment: Provides precise control over installation settings.
- 5% Lighter: Reduces user fatigue with a lighter design.
- Ergonomic Design: Matches the RIV938 and RIV939, offering improved comfort during prolonged use.
Ideal for a Range of Applications and Grip Sizes
The RIV943 is designed for use across various industries, including automotive, heavy truck, construction and agricultural equipment, and metalworking applications. Its powerful 32 kN of force, ergonomic design, and ability to install a wide range of sizes make it ideal for assembly line and medium to high volume installations.
See the available parts list, please click here. Click here to view the RIV943 data sheet.
RIVIT943-1_2.png FLEX-18 Rivet Nut Installation Tool 5/16-18 - 3/4-10 (M8-M20)
(12)The FLEX-18 Spin-Pull Tool is the strongest rivet nut installation tool on the market with a pulling force of 18,000 lbs. (80 kN) & 15mm (.591 inches) of available stroke. The tool is capable of installing rivet nuts from 5/16-18 to 3/4-10 and M8 to M20. The tool offers the flexibility of both pull-to-pressure and pull-to-stroke installation methods based on application requirements.
The SFS FLEX-18 is a pistol-style grip tool with a remote booster unit attached. It also can be upgraded to incorporate process monitoring. The tool features a single-stage trigger, automatic reverse with manual reverse bypass, and socket head cap screw mandrel for sizes up to 1/2-20 & M12.
DOWNLOAD FLEX-18 MANUAL
MS 100 Rivet Nut Installation Tool 5/16-18-1/2-13 (M8-M14)
(12) The MS 100 Rivet Nut Installation Tool is designed for installing thin wall & heavy duty rivet nuts from 5/16-18 to 1/2-20 (M8-M14).This all-purpose Spin-Pull tool is adjustable to install rivet nuts in materials of different thickness and has a one-touch trigger with auto reverse for easy installation. It comes with one Mandrel and Anvil.
Note
The MS 100 installation tools should be operated at 80-100 psi. Sherex recommends the use of an air regulator, air filter and lubrication system to reduce the wear of internal components. It is also recommended to lubricate the mandrel to increase performance. Mandrels should be replaced when excessive thread wear occurs.
Spin-Pull Rivet Nut Installation
Spin-Pull tools, while able to install any style of rivet nut, are used primarily for the installation of heavy-duty rivet nuts due to their higher installation force. A Spin-Pull tool operates by spinning the rivet nut onto the tool and then pulling back on the threads to install the rivet nut. The tool can be adjusted for different grip lengths and to achieve proper setting.
To begin, ensure that the mandrel extends at least one thread beyond the end of the rivet nut. Next, hand thread the rivet nut one turn onto the mandrel to prevent thread crossing. Depress the trigger halfway to thread the rivet nut onto the mandrel.
With the rivet nut flush against the head of the tool, place the rivet nut into the properly sized hole in the parent material and fully depress the trigger of the tool.
When the rivet nut is installed, the body of the rivet nut will expand in the hole and then form the bubble on the backside of the parent material. Once the rivet nut is installed, release the trigger activating the tool's automatic reversing feature.
To the right is a properly installed heavy-duty rivet nut. The increased wall thickness and flange thickness make the CA series ideal for applications where a high strength fastening joint is necessary. New-MS100.png
