Specialty Fasteners | Sherex Fastening Solutions

Sherex's Application and Design Engineers create custom, application-specific solutions. We work with our customers to understand the application requirements and manufacturing scenario, and then design best-fit specialty fastening solutions.

We are available for line walks and to collaborate with your engineering and manufacturing teams. Bring us your fastening challenges, and our team will design and manufacture a high-performance, lowest-total-installed-cost solution! These products can be anything from rivet nuts, to clinch nuts, compression limiters, and other threaded inserts that will improve the installation process and performance of the application.

Contact us today to learn more.

		Description
comp-lim-head-part-revised	N/A	N/A This Dejond® part was designed with a "compression limiter-like" collar on the flat head, used to act as a spacer between two assembled components	comp-lim-head-part-installed-resized
picture-2-revised	N/A	N/A This part was developed to attach a molded plastic cover to a base unit. If the rivet nut has an outside thread to accept a nut, the plastic cover could be altered and the external thread of the rivet nut could be used for the attachment point.	picture-2-rendered-resized
SH-11-013-revised	N/A	N/A Special small grip part designed for materials thinner than 0.030 inches	SH-11-013-inst-rendered-resized
SH-18-035-resized	N/A	N/A A replacement for a more expensive, machined component that would periodically spin-out. The customer required a low-profile insert with high spin-out resistance. Sherex developed this part has a half-hex body to increase spin performance, 0.145" max installed length, and higher strength threads to withstand installation forces.	SH-18-035-installed-resized
SH-13-043-resized	N/A	N/A Sherex shouldered rivet nut was developed for attachments in plastics. The shoulder design provides a positive metal to metal installation redirecting the load of the joint through the rivet nut shoulder. This minimizes the plastic from creeping during assembly and maintains joint clamp load	SH-13-043-inst-rendered-resized
CPB2-610-7-1WT-resized	N/A	N/A M6 prebulbed slotted body design incorporated under head wedgets to increase spin out resistance in soft plastic	CPB2-610-7-1WT-inst-ren-resized
CPB2-3118-280-TRH-resized	N/A	N/A 5/16-18 prebulbed slotted body style with a trimmed head. This head feature allowed installation in the field by the consumer to assembler when used with a special low cost installation tool. Feature also allows head to sit flush within a slot to prevent spin out.	CPB2-3118-280TRH-inst-ren-resized
984529-resized	N/A	N/A Closed end design with o-ring and o-ring recess under head provides the ultimate sealing solution for attachment points in applications with chemicals and other fluids that breakdown other sealing compounds.	984529-inst-rendered-MP-Resized
CAH2-610-4-2H3MM-resized	N/A	N/A Designed with an extra large head to act like a spacer.	CAH2-610-4-2H3MM-inst-rend-resized
SH-10-018-revised	N/A	N/A Sherex developed this part to add increased spin-out resistance in soft materials. Special knurl design provides increased engagement with the base material. Small flange provided near flush installation.	SH-10-018-inst-rendered-resized
T148409-resized	N/A	N/A Sherex developed a high strength rivet nut that is compatible with class 10.9 bolts. This design incorporates a full hex body for increased spin-out resistance. It also ensures the bolt is the failure mode, which is a best practice when working with structural applications.	T148409-inst-rendered-resized
SH-13-031-resized	N/A	N/A Special head and wedge design to meet spin-out requirements in an application.	SH-13-031-rendered-resized
	N/A	N/A Examples of Sherex Custom Engineered Specialty Products

Description

comp-lim-head-part-revised

N/A

N/A This Dejond® part was designed with a "compression limiter-like" collar on the flat head, used to act as a spacer between two assembled components

comp-lim-head-part-installed-resized

picture-2-revised

N/A

N/A This part was developed to attach a molded plastic cover to a base unit. If the rivet nut has an outside thread to accept a nut, the plastic cover could be altered and the external thread of the rivet nut could be used for the attachment point.

picture-2-rendered-resized

SH-11-013-revised

N/A

N/A Special small grip part designed for materials thinner than 0.030 inches

SH-11-013-inst-rendered-resized

SH-18-035-resized

N/A

N/A A replacement for a more expensive, machined component that would periodically spin-out. The customer required a low-profile insert with high spin-out resistance. Sherex developed this part has a half-hex body to increase spin performance, 0.145" max installed length, and higher strength threads to withstand installation forces.

SH-18-035-installed-resized

SH-13-043-resized

N/A

N/A Sherex shouldered rivet nut was developed for attachments in plastics. The shoulder design provides a positive metal to metal installation redirecting the load of the joint through the rivet nut shoulder. This minimizes the plastic from creeping during assembly and maintains joint clamp load

SH-13-043-inst-rendered-resized

CPB2-610-7-1WT-resized

N/A

N/A M6 prebulbed slotted body design incorporated under head wedgets to increase spin out resistance in soft plastic

CPB2-610-7-1WT-inst-ren-resized

CPB2-3118-280-TRH-resized

N/A

N/A 5/16-18 prebulbed slotted body style with a trimmed head. This head feature allowed installation in the field by the consumer to assembler when used with a special low cost installation tool. Feature also allows head to sit flush within a slot to prevent spin out.

CPB2-3118-280TRH-inst-ren-resized

984529-resized

N/A

N/A Closed end design with o-ring and o-ring recess under head provides the ultimate sealing solution for attachment points in applications with chemicals and other fluids that breakdown other sealing compounds.

984529-inst-rendered-MP-Resized

CAH2-610-4-2H3MM-resized

N/A

N/A Designed with an extra large head to act like a spacer.

CAH2-610-4-2H3MM-inst-rend-resized

SH-10-018-revised

N/A

N/A Sherex developed this part to add increased spin-out resistance in soft materials. Special knurl design provides increased engagement with the base material. Small flange provided near flush installation.

SH-10-018-inst-rendered-resized

T148409-resized

N/A

N/A Sherex developed a high strength rivet nut that is compatible with class 10.9 bolts. This design incorporates a full hex body for increased spin-out resistance. It also ensures the bolt is the failure mode, which is a best practice when working with structural applications.

T148409-inst-rendered-resized

SH-13-031-resized

N/A

N/A Special head and wedge design to meet spin-out requirements in an application.

SH-13-031-rendered-resized

N/A

N/A Examples of Sherex Custom Engineered Specialty Products

Email ^*
First Name ^*
Last Name ^*
Company ^*
Country ^*
Zip/Postal Code ^*