Designed for installing Sherex CAL, CAK, CAH, CAO, CFT/CAT, CFW/CAW, and CPB Rivet Nut Inserts (thin wall only).
Right Angle allows the usage in difficult to access applications.
Features quick change nose piece for head set replacement without tools.
Spin-Spin tools are also available in a Pistol Grip Version and an
Inline Version.
High temperature grease should be used to lubricate the bearing set.
Sherex recommends the use of an air regulator, air filter, and lubrication system to reduce the wear of internal components. It is also recommended to lubricate the mandrel to increase performance.
Mandrels should be replaced when excessive thread wear occurs with a high quality socket head cap screw.
Thread Size |
N/A 10-24 |
Tool Speed |
N/A 1100 rpm |
Air Pressure |
N/A 60-80 psi (4.1-5.5 bars) |
Weight |
N/A 2.3 lbs (1 kg) |
Air Inlet NPT |
N/A 1/4 Inch |
Air Use |
N/A 5 cfm |
Min. Hose Size |
N/A 3/8 Inch |
Complete Head Set Assembly P/N |
N/A HS-1024 |
Hex Driver P/N |
N/A HD-10 |
Mandrel P/N |
N/A M-1024-175 |
Bearing Set P/N |
N/A BS-10 |
